Lay / Repair.
The introduction of the five star home energy rating system brings with it some dramatics changes to the traditional process of laying and sanding timber floors.
The days of stumps, bearers and joists are fast fading, replaced by concrete slabs with timber laid over battens, direct stick or over ply.
These are installation methods some builders prefer to leave alone. With qualified and highly experienced floor installers consistency is acheived by our dedicated team producing the same high quality standards continually that our customers have come to expect, and that provide peace of mind and the satisfaction of a job well done.
At Pro Sanding, every job is rigorously tested and recorded to ensure that the floor is laid according to the appropriate guidelines and that all relevant factors are considered as part of a commitment to obtaining the best finish. Slab moisture is a key element, but the use of Aquron 2000 helps alleviate any concerns.
Direct Stick
The key to a great result is preparation and the quality obtained using the direct stick method will only be as good as the preparation. Knowledge of concrete and its properties is generally low, resulting in problems of movement and delamination. Our trained staff are equiped with all necessary equipment to carry out any preparation works prior to the installation of a direct stick timber floor.
Batten Laying
This is the most popular method for laying timber floors in specific areas of new homes. The process involves a recessed slab, installation of kiln dried hardwood as battens, then laying the selected floor boards to suit the customer's requirements. The width of the flooring product determines whether boards are secret nailed or face nailed.
Ply Overlay
This is another way to install a timber floor with minimal fuss, it allows for flooring height to be similar to tiles or carpet. The timber floor can be secret nailed, depending once again upon the board width. Ply overlay can also help compensate for any imperfections in the existing concrete slab.
With the support of ATFA, Pro Sanding now offers an Australia wide support base to provide information on any system and product, as well as vast experience to assist the customer 100%.